+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [LW] [LW11] Replace C120 with E120 (/showthread.php?tid=10720)
[LW11] Replace C120 with E120 - Cheeky G - 03-09-20 11:01 AM
Hi
I have a C120plotter that the screen has died and I have a spre E120 that I can replace it with.
My probelm is the C120 is wired up using the Seatalk 3 pin connector, on the E120 this connection is not there.
Can I cut the cable with the Seatalk connector and connect to a Seatalk 2 connection?
Regards
Graham
RE: [LW11] Replace C120 with E120 - Derek - Raymarine - Moderator - 03-10-20 09:11 AM
Dear Graham,
SeaTalk 1 is not compatible with SeaTalk 2, however, the E Series has a round connector labelled SeaTalk/ Alarm, the diagram below shows the connections.
Regards
Derek
RE: [LW11] Replace C120 with E120 - Cheeky G - 03-27-20 07:38 AM
Hi
Bought a cable and now working.
Thanks
Graham
RE: [LW11] Replace C120 with E120 - Louise - Raymarine - Moderator - 03-27-20 08:54 AM
Stay safe
Louise Williams