+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] depth info integration between LH2 and LH3 (/showthread.php?tid=10722)
[CA11] depth info integration between LH2 and LH3 - ihtruelsen - 03-09-20 02:22 PM
I have an a127 at my main nav station and bought an Axiom 7 to use at my aft steering station. I understand that it is not possible to integrate these fully via ethernet, but all I am looking to get is the depth info from the A127 to the Axiom: Is there any way to do this, even if it is via NMEA 0183?
RE: [CA11] depth info integration between LH2 and LH3 - Chuck - Raymarine - Moderator - 03-09-20 02:44 PM
Welcome to the Raymarine Forum ihtruelsen,
Unlike the Axiom Pro & Axiom XL MFDs, the Axiom MFDs do not feature a NMEA 0183 communications interface. It is recommended that these MFDs each be interfaced as a spur to a powered and properly terminated SeaTalkng / NMEA 2000 backbone to permit them to share numerical depth data (not to be confused with fishfinder feautures).