+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: replacing ST60 with i60 (/showthread.php?tid=1074)
replacing ST60 with i60 - bartonk1 - 06-07-16 08:16 PM
I currently have an ST60 installed, and I'm considering upgrading to an i60 to interface with my new eS98 MFD (which I am preparing to install).
Question: do I need to replace the masthead transducer and the cable going down the mast in order to use the i60?
Appreciate any advice - thanks!
RE: replacing ST60 with i60 - Chuck - Raymarine - Moderator - 06-09-16 12:51 PM
Welcome to the Raymarine Forum bartonk1,
The i60 Wind Instrument was designed to support the same wind transducer that the ST60 Wind Instrument had been designed to support. Accordingly the wind transducers leads may simply be unplugged from the ST60 Wind Instrument and then plugged into the corresponding color coded terminals of the i60 Wind Instrument.