Raymarine forum
[CA] [CA11] Autohelm ST50 Speed replacement - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [CA] [CA11] Autohelm ST50 Speed replacement (/showthread.php?tid=10774)



[CA11] Autohelm ST50 Speed replacement - optionsailor - 03-17-20 12:44 PM

I now have the following installed:

Autohelm ST50 Speed;
ST60+ Depth; ST60+ Wind (w/ST60 short arm vane xducer);ST60 Multi;
Axiom9;
EV400; Reversing Hydraulic Pump Type 2 12V;
2 Seatalk1 to Seatalkng converter kits;
Quantum II Doppler;
Ray218 DSC VHF; Raymic;

What do you recommend to replace the Autohelm ST50 Speed?


RE: [CA11] Autohelm ST50 Speed replacement - Chuck - Raymarine - Moderator - 03-18-20 01:27 PM

Welcome to the Raymarine Forum

Q. What do you recommend to replace the Autohelm ST50 Speed?
A. Given the equipment listed, it would be recommended that an i50 Speed Instrument be used to replace a failing ST50 Speed instrument. The i50 Speed may interfaced via an appropriate length of SeaTalkng Spur Cable to a spur (white) socket within the SeaTalkng / NMEA 2000 backbone (best practice) or alternatively may instead be interfaced to the SeaTalk bus via an A06047 / 15.7in (0.4m) or A06073 / 39.4in (1.0m) SeaTalkng Spur Socket to SeaTalk Adapter Cable.