+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] Network Diagram - DUAL AXIOM MFDs (/showthread.php?tid=10836)
[CA11] Network Diagram - DUAL AXIOM MFDs - msantella - 03-27-20 01:17 PM
I would appreciate it if you could review the attached network diagram using the following equipment:
2 - Axiom 9 MFD with internal sonar
Raydome 418HD Radar
Ray 53 VHF Radio
Fusion RA 70 Marine radio
RV-100 - downvision Transducer
CP370 Sonar Module
B260 Transducer
HS5 Ethernet Switch
Seatalk
RE: [CA11] Network Diagram - DUAL AXIOM MFDs - Chuck - Raymarine - Moderator - 03-27-20 01:28 PM
Welcome to the Raymarine Forum msantella,
Your network diagram is off to a good start. It appears to only be missing the following items:
- a spur (white) socket within the backbone, through which the backbone will be powered from a switched 12VDC power circuit. Please click here to view a FAQ addressing how additional spur sockets may be added to the backbone.
- SeaTalkng Termination Plugs within the backbone's two end sockets
RE: [CA11] Network Diagram - DUAL AXIOM MFDs - msantella - 03-30-20 07:19 AM
Chuck, realized that my Fusion stereo is not network capable so I have the following drawing for review:
Thanks
RE: [CA11] Network Diagram - DUAL AXIOM MFDs - Chuck - Raymarine - Moderator - 03-30-20 07:46 AM
Mark,
The only item which appears to be missing from the diagram is a power connection to the VHF radio. Otherwise, good job.