+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [LW] [LW11] No sidebar LH3 (/showthread.php?tid=10846)
[LW11] No sidebar LH3 - Legato - 03-29-20 04:58 AM
My eS97 on Lighthouse 3.11.42 has no sidebar and there seems to be no settings to change this. Updated from LH2, so cannot tell if earlier LH3’s had the same issue. Currently the yacht is out of the water without any transducers connected/active, but that would surely not affect the software?
RE: [LW11] No sidebar LH3 - Louise - Raymarine - Moderator - 03-30-20 08:31 AM
Dear Legato,
Many thanks for your post.
Lighthouse 3 is a completely different operating system to Lighthouse 2 and does not come with the user interface that you are used to in Lighthouse 2.
Lighthouse 3 does have a sidebar with databoxes you can edit. Please see the attached image showing this, you can also refer to the Lighthouse 3.11.42 manual available here.
Is your eS97 the only MFD onboard or is it networked with an Axiom product?
Many Thanks
Louise
RE: [LW11] No sidebar LH3 - Legato - 03-31-20 02:49 PM
Found the fix (by coincidence): a factory reset did the trick!
RE: [LW11] No sidebar LH3 - Louise - Raymarine - Moderator - 04-02-20 05:26 AM
Great and stay safe.
Many Thanks
Louise