+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] SeaTalk Network Diagram Sail Navigation (/showthread.php?tid=10886)
[CA11] SeaTalk Network Diagram Sail Navigation - Jetskimom - 04-03-20 11:38 AM
Do I need a designated power connection from the backbone using a spur cable?
Please look for conflicts, errors and omissions, Thank you.
All suggestions welcome.
RE: [CA11] SeaTalk Network Diagram Sail Navigation - Chuck - Raymarine - Moderator - 04-03-20 12:24 PM
Welcome to the Raymarine Forum
Q1. Do I need a designated power connection from the backbone using a spur cable?
A1. Yes. Please click here to view a FAQ addressing this subject.
Q2. Please look for conflicts, errors and omissions.
A2. With the exception of the issue addressed in Q1, your diagram appears to be correct. Please click here to view a FAQ addressing installation of power circuits for marine electronics. Please additionally click here to view a FAQ addressing installation of power circuits for marine electronics.