+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: General Discussions (/forumdisplay.php?fid=2)
+--- Thread: [CA] [CA11] Adaptor Plate (/showthread.php?tid=10906)
[CA11] Adaptor Plate - Yachtmaster - 04-07-20 12:37 PM
Good day,
Has anyone used the Raymarine A80531 adapter plate to install the Axion 12 Pro MFD in place of the e120w MFD cutout? Is there sufficient overlap on the tops and sides of the adapter to use a marine sealant as the unit will be installed outside...?
Thanks
RE: [CA11] Adaptor Plate - Chuck - Raymarine - Moderator - 04-09-20 08:32 AM
Welcome to the Raymarine Forum Yachtmaster,
Q. Is there sufficient overlap on the tops and sides of the adapter to use a marine sealant as the unit will be installed outside...?
A. Indeed you should find that the adapter plate overlaps the mounting surface sufficiently to permit sealant to be applied between the mounting surface and the adapter plate.
RE: [CA11] Adaptor Plate - Yachtmaster - 04-10-20 07:01 AM
Thanks.....
RE: [CA11] Adaptor Plate - Chuck - Raymarine - Moderator - 04-10-20 08:29 AM
You're welcome.