+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: which O ring do I use (/showthread.php?tid=1099)
which O ring do I use - LeslieTroyer - 06-09-16 01:05 PM
I have a DST800 - I want to put the sensor into an existing airmar housing. I've made sure the sensors are the same length.
The differences between the two are the lack of a gate and a notch at the top of the old housing. Do I use the thick O-ring with this housing --
I'll change to the supplied fitting when I next pull the boat.
Les
RE: which O ring do I use - Chuck - Raymarine - Moderator - 06-09-16 01:43 PM
Welcome to the Raymarine Forum Les,
It is recommended that Gemeco's (Airmar's US distributor) support team be consulted on this subject.
RE: which O ring do I use - LeslieTroyer - 06-17-16 01:51 PM
I got [email protected] from their web site.
Les
RE: which O ring do I use - Chuck - Raymarine - Moderator - 06-20-16 09:25 AM
Noted.