Raymarine forum
[CA] [CA11] C80 Radar Onlh - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] C80 Radar Onlh (/showthread.php?tid=10996)



[CA11] C80 Radar Onlh - lawndoctor - 04-21-20 09:39 AM

Hello, I am installing a second C80 on my Sea Ray, and I plan to use it to display radar only. I have the 18” dome, not open array, so as I understand it the radar sensor does not need its own power source. I will connect the C80 to its own power cord and to the radar cable. Do I also need to connect the unit to the GPS antenna for the radar to display properly, or am I OK with the just the power cord and the radar cable? Thanks very much for your help.


RE: [CA11] C80 Radar Onlh - Chuck - Raymarine - Moderator - 04-22-20 11:06 AM

Welcome to the Raymarine Forum lawndoctor,

Q1. I have the 18” dome, not open array, so as I understand it the radar sensor does not need its own power source.
A1. Correct. The C/E-Series Classic MFDs were capable of supplying power to a radome.

Q2. Do I also need to connect the unit to the GPS antenna for the radar to display properly, or am I OK with the just the power cord and the radar cable?
A2. If simply seeking to operate the radar in head-up orientation and not other orientations, or MARPA features, then nothing else need be interfaced to the MFD.