+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: CP370 interfaced to E-Series Classic MFD: no imaging plotted, no depth (/showthread.php?tid=110)
CP370 interfaced to E-Series Classic MFD: no imaging plotted, no depth - Chuck - Raymarine - Moderator - 01-14-16 03:52 PM
CP370 interfaced to E-Series Classic MFD: no imaging plotted, no depth
Should a CP370 be interfaced to an E-Series Classic MFD, no fishfinder imaging will be plotted and no depth will be reported from the CP370 until the MFD's Fishfinder application settings have be configured to specify the model of transducer which has been interfaced to the CP370. Each Raymarine Fishfinder transducer features a tag affixed to the plug end of the transducer's cable. The command sequence to select the transducer is MENU->FISHFINDER SETUP->TRANSDUCER SETTINGS->SELECT TRANSDUCER.
RAYFAQ#