+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: NAVAIDS (/forumdisplay.php?fid=122)
+--- Thread: [TG] Waypoint number indicators don't count from zero (/showthread.php?tid=11065)
Waypoint number indicators don't count from zero - GradyII - 04-28-20 05:07 PM
Hello, I just purchased a used Grady with your C120 installed. I was able to delete the existing waypoints but when I try to add new the numbering doesn’t start at one. He had over 170 waypoints saved in another area I don’t fish. Is it possible to get this back to the beginning numbers??? Thanks Doug
RE: Waypoint number indicators don't count from zero - Tom - Raymarine - Moderator - 04-28-20 08:11 PM
Hello Doug,
This is normal for a C-series and in fact any of our displays. It's just simpler from the point of view of the software design, and ensures that if you create 2 consecutive waypoints then they have consecutive numbers, which might well not be the case if (for example) you'd previously deleted Waypoints 1 and 3 but not Waypoint 2, and we always tried to use the lowest available number.
To get the waypoint numbering to start again from zero you'd need to do a Factory Reset (Settings And Data reset.) Make sure you back up any other setup and data you want to keep first though.
Regards,
Tom