+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [CA] [CA11] Unexpected hardware reset error (/showthread.php?tid=11091)
[CA11] Unexpected hardware reset error - dustinzstingray - 04-30-20 11:21 AM
Hello again.
I'm testing a smartpilot x10 on my bench. using a p70r and a st6001 for display. I keep getting an error saying unexpected hardware reset when i power it on. Its not consistent every power up. But frequent enough that its a problem. Could this be a problem with the p70r? I have not seen the error when i take the stng out and just run the st6001.
Thank you for your time.
RE: [CA11] Unexpected hardware reset error - Chuck - Raymarine - Moderator - 04-30-20 12:02 PM
Welcome back to the Raymarine Forum dustinzstingray,
Please ensure that the SPX autopilot course computer has been updated with v3.05 software and that the p70R has then been interfaced to the autopilot course computer via a powered and properly terminated SeaTalkng / NMEA 2000 backbone rather than via SeaTalk.