+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CC11] Can I live stream a third party camera that is H.265 compliance? (/showthread.php?tid=11112)
[CC11] Can I live stream a third party camera that is H.265 compliance? - ray18 - 05-01-20 12:12 PM
Can I live stream a third party wired IP camera that is H.265 compliance?
Many cameras that is H.265 can comply to H.264, so can I use it to live stream to Axiom MFD?
> - Network/IP Cameras (ex. Raymarine CAM210, CAM220, CAM200IP, FLIR
> M132/M232 Thermal Cameras (MFDs running LH3 software only ... MFDs
> running LightHouse II software will be able to display video only from
> these thermal cameras), etc.) and video encoders (ex. Axis M70 Series
> Encoders (M7011, M7014, M7016), etc.)
> IP Camera Product Requirements:
> - Must support H.264 video compression
> - Must support RTSP (Real Time Streaming Protocol)
> - Must support ONVIF Service Detection (ONVIF User Authentication MUST
> BE DISABLED)
> - Must have DHCP enabled & Dynamic IP set to ON
> - 720p resolution or 1080P
RE: [CC11] Can I live stream a third party camera that is H.265 compliance? - Chris - Raymarine - Moderator - 05-06-20 01:16 PM
Hello Ray18,
Please see a faq regarding this question, https://forum.raymarine.com/printthread.php?tid=31