+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: TYPE 100 ECU AND P70R HEAD (/showthread.php?tid=11121)
TYPE 100 ECU AND P70R HEAD - ybojarczuk - 05-02-20 02:03 PM
Good afternoon.
I have an old sailboat that has the following equipment: ECU TYPE 100, with M81121 Type 2 Hydraulic Pump 12 V, the control head is the P70R, originally used the AUTOHELM 7000, but even using the seatalk to seatalkng converter I cannot access the settings for system calibration, on the p70r, could you give me a tip?
RE: TYPE 100 ECU AND P70R HEAD - Chris - Raymarine - Moderator - 05-06-20 02:32 PM
Hello ybojarczuk and welcome to the Raymarine forum,
The p70r does not have the ability to calibrate a type 100 course computer. The course computer would have to be at least a type 150/400 or be of the S1/2/3 series. In this case you would need to find a older control head that is compatible with the type 100 or upgrade the type 100 to a EV-1 and ACU400 to access the calibration.