+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Thermal Cameras (/forumdisplay.php?fid=127)
+--- Thread: [CC11] Object detection alarm (/showthread.php?tid=11139)
[CC11] Object detection alarm - Chief - 05-04-20 07:22 AM
I have an M232 camera installed along with both Axiom Pro 12” and 9”. I typically have the M232 displayed on the 9”. I have tried to get the object detection beep to sound through a Bluetooth speaker because the internal beep from the 9” and 12” units are barely audible with the engine running. The Bluetooth speaker is connected and works on both anchor alarm and apps but not with the camera beeps.
Can this be done successfully?
Thanks,
John
RE: [CC11] Object detection alarm - Chris - Raymarine - Moderator - 05-11-20 02:20 PM
Hello Chief,
The clearcruise alarm is local to the displays and connect be toggled. Because if this it ultimately will not sound on the bluetooth speaker. For more information on this I would recommend calling our technical support line and talking to a support specialist or a applications engineer. 800-539-5539.
Regards,