+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [TG] E Series thru hull transducer, steel hull. (/showthread.php?tid=11148)
E Series thru hull transducer, steel hull. - Kira - 05-05-20 04:57 AM
Can you please advise the appropriate thru hull transducer model for the E Series E127 multifunction display.
I would prefer it to be made of plastic and also need a supplier in northern NSW, Australia.
The transducer must be able to be adjusted for up to 20 deg deadrise.
RE: E Series thru hull transducer, steel hull. - Tom - Raymarine - Moderator - 05-07-20 10:37 PM
Hello Kira,
We don't do a plastic through-hull suitable for that angle of deadrise that's e127-compatible. We do offer a stainless-steel version though, the A80570 SS60 20-degree tilt with an E66066 adaptor cable. In plastic we only have 0-degree tilt that are directly compatible with that display.
We have a dealer locator at https://www.raymarine.com.au/buy/find-a-dealer.html: we have 2 dealers in each of Coffs Harbour or Port Macquarie, or on the Gold Coast.
Regards,
Tom