+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [JB] Multiple Data Master Error (/showthread.php?tid=11162)
Multiple Data Master Error - sgdunn - 05-05-20 07:08 PM
I have 2 MFD (Axiom 12 and Axiom 7). When both are turned on, intermittently, I get a multiple data master error followed by a brief screen pops= up, as show in the attachment, only for a second or two. I am unable to select anything due to it disappearing so fast.
Basically, I somehow need to assign the Axiom 7 as a DM?
Any help would be appreciated!
RE: Multiple Data Master Error - Jules - Raymarine - Moderator - 05-06-20 12:45 AM
Hi sgdunn,
Welcome to the forum,
As indicated in your photo with the Axiom 7 at the top of the networked devices - you need to press "Assign as datamaster" as shown on the pop-up. Alternatively, when you see the pop-up message to select a data master display you select the one you want.
This is described in the Operation manual for Lighthouse 3.11 at the bottom of this page https://www.raymarine.com/multifunction-displays/axiom/axiom7.html
Hope this helps
Happy boating
Kind regards
Jules