+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: Axiom networking (/showthread.php?tid=11189)
Axiom networking - boatman2 - 05-07-20 04:37 PM
I have two Axioms rv 9 w/rv100 trans mount, a remote reader networked together. I just bought a Ev 150 and a SR200 and a RMK-10 what do I need to connect them together. Maybe you can send a diagram or where I can find one on line. do I need some kind of box?
RE: Axiom networking - Chris - Raymarine - Moderator - 05-11-20 03:48 PM
Hello Boatman2,
You would use the HS5 to network the SR200 and the RMK-10. Their installation guide are included in the box with them additonally all the manuals can be found here, https://www.raymarine.com/service-and-support/manuals-and-documents/
RE: Axiom networking - boatman2 - 05-13-20 10:05 AM
Thank you. got one coming
RE: [CC11] Axiom networking - boatman2 - 05-13-20 06:24 PM
I now have the HS5. As far as the EV 150 goes. How does it connect to the 2 Axioms? My 2 Axioms are networked together. Will I have to change the way they are network to include the HS5 as I put the rest of my equipment together. I hope I have enough ports to connect everything I have. Any suggestions will help.
RE: Axiom networking - Chris - Raymarine - Moderator - 05-15-20 09:50 AM
Hello Boatman2,
The EV-150 will come with its own STNG backbone wiring to connect itself together. It will have an open white connection for adding an optional piece of equipment like a MFD(Axiom). You will need a black and white STNG to device net cable to connect from the backbone of the EV-150 to the five pin device net connection on the power cable of the Axiom designated as the master.
Chris,