+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: Power Control (/showthread.php?tid=11224)
Power Control - svalvasori - 05-11-20 08:42 AM
I have an e127 and a smaller Axiom MFD. The e127 is the master and they are running LH3. Is it possible to have the power of the slave MFD turn on and off with the master? I feel like it should be able, but have not found the option to enable it.
RE: Power Control - Chris - Raymarine - Moderator - 05-13-20 02:58 PM
Hello svalvasori,
These displays do not have the option you are describing. They will need to be turned off individually unless they could be powered from the same circuit breaker.
Chris,