+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [TG] [TG11] CPT120 Tranducer with Axiom or Axiom Pro? (/showthread.php?tid=11262)
[TG11] CPT120 Tranducer with Axiom or Axiom Pro? - TheOiler - 05-13-20 08:13 PM
I'm planning an upgrade from an eS78 to an Axiom or Axiom pro. I now have a CPT120 transducer. Is this transducer compatible with Axiom?
Or will the recommended transducer fit in the CPT120's bore size for installation?
RE: [TG11] CPT120 Tranducer with Axiom or Axiom Pro? - Tom - Raymarine - Moderator - 05-15-20 12:44 AM
Hello TheOiler,
Yes, you can use the eS78's CPT120 with an Axiom 7 DV, Axiom 7/9/12 RV or Axiom Pro RVX via an adaptor cable, part numbers as follows:
- Axiom 7 DV: no adaptor required, direct connect
- Axiom 7/9/12 RV: A80490
- Axiom Pro RVX: A80490
Axiom non-RV/non-DV and Axiom Pro S are not compatible with this transducer.
To get the RealVision 3D and SideVision images, you would need to change the CPT120 for the RV-series transducer(s) suitable for your hull.
Regards,
Tom