+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Marine Cameras (/forumdisplay.php?fid=121)
+--- Thread: CAM220IP Bend Horizon (/showthread.php?tid=11303)
CAM220IP Bend Horizon - JPCavanagh - 05-15-20 07:26 PM
The attached image shows in the top left the picture from a CAM220IP which is 10.5m above the water line. The bottom left shows a similar picture from an M232 about 0.5m higher.
The M232 picture (with its tighter field of view) shows a level horizon. (Slightly slanting because the boat was moving and stabilization was off).
The CAM220IP shows a much more curved horizon across its' FOV.
I cant find a setting to correct this curvature.
Please advise.
Thanks
John