Raymarine forum
[JB] [JB] Element 9S COG vector - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [JB] [JB] Element 9S COG vector (/showthread.php?tid=11323)



[JB] Element 9S COG vector - HighCs - 05-17-20 08:18 PM

I recently upgraded from the A60 to the Element and no longer have a vector showing COG. I appreciated having range rings and vector lengths available to me. Is this not available with the element?


RE: [JB] Element 9S COG vector - Jules - Raymarine - Moderator - 05-20-20 02:32 AM

Hello HighCs,

Welcome to the Raymarine forum,

On the chart page of your Element 9S you can enable the COG vector by moving the cursor over your vessel icon, which will turn red, and press OK. Use up/down arrows to move to COG on the menu and press OK. You can also change the length of the vector line by changing the Reference period.

Happy boating and kind regards
Jules