+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: C90W - Does not power up - buttons flash only (/showthread.php?tid=11374)
C90W - Does not power up - buttons flash only - natesms - 05-21-20 09:02 AM
My c90w will not power up, the screen does not turn on at all. When pressing the power button the buttons on the right will just flash 3 times.
I'm afraid I fried the thing as I now realize I was feeding it multiple power sources. I recently hooked the c90w to a ST60 via a Seatalk to SeaTalkNG adapter. The ST60 was receiving power via it's original power connection, and the c90w was getting power from it's own power source. This setup worked for a few weeks, and now it just flashes when the power button is pressed.
I tried unhooking the SeaTalkNG connection, but the behavior does not change.
I tried powering the c90w off a powered SeaTalkNG system and nothing happens at all in that configuration.
Any suggestions are much appreciated.
RE: C90W - Does not power up - buttons flash only - Chris - Raymarine - Moderator - 05-21-20 12:34 PM
Hello natesms,
I would recommend checking that the fuse for it has not blown. If is still does not power up I would recommend contacting a Raymarine Dealer for assistance, https://www.raymarine.com/buy/find-a-dealer.html
Chris,