+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124)
+--- Thread: Axiom 7 and airmar compatibility (/showthread.php?tid=11377)
Axiom 7 and airmar compatibility - tsing - 05-21-20 02:58 PM
I have a e7 with hybrid touch. I have an airmar st850pv for speed and an airmar dt800pv for depth I also have an St 70+ display at the mast. I’m looking to upgrade to the axiom 7 to take advantage of the lighthouse sailing features and want to know it this is all going to be comparable and work on the network. Thanks
RE: Axiom 7 and airmar compatibility - Chris - Raymarine - Moderator - 05-26-20 04:26 PM
Hello tsing,
A Axiom 7 will preform the same as the e7 in regards to the NMEA2000/STNG buss.
The equipment you have will work the same with the Axiom 7 as it did with the e7.
i would recommend upgrading to the Axiom 7. If the e7 is flush mounted there is even a adapter plate to fit the Axiom 7 in the e7 footprint.
Chris,
RE: Axiom 7 and airmar compatibility - tsing - 05-28-20 05:13 PM
Thanks for the reply. I was looking at the lighthouse 3 software, will it work with my e7 with hybrid touch ? It seems like one place I looks says no and one place says yes .
Thanks theo
RE: Axiom 7 and airmar compatibility - Jules - Raymarine - Moderator - 06-01-20 12:44 AM
Hello Theo,
Lighthouse 3 software will NOT work on an e7. The e7 can only work on Lighthouse 2.
Happy boating and kind regards
Jules