+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [JB] [JB11] Fuel Tank View NMEA 2000 (/showthread.php?tid=11396)
[JB11] Fuel Tank View NMEA 2000 - ocgrant - 05-23-20 06:10 PM
I installed this and it is working but I only have 2 fuel tanks and tank 2 is showing no data. If I add tank 3 it has what is actually in tank 2. How do I correct this so I don't have to have 3 tanks on the display?
RE: [JB11] Fuel Tank View NMEA 2000 - Jules - Raymarine - Moderator - 05-28-20 09:35 PM
Hello ocgrant,
The MFD can only display data that is being sent to it from a particular sensor instance, let's say you can call it a channel. Often instances are setup logically as 1 ... 2 ... 3 and so on. In fact with programming, in just about every case, the first instance is 0. You will find that when you set the first tank as instance 0 in the sensor setup it will show correctly on the MFD.
Hope this helps
Happy boating and kind regards
Jules