+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: AIS (/forumdisplay.php?fid=22)
+--- Thread: [LW] [LW11] AIS700 works only with ProAIS2 connected (USB) (/showthread.php?tid=11412)
[LW11] AIS700 works only with ProAIS2 connected (USB) - bhollard - 05-25-20 03:13 AM
Hello,
I have an issue with my new AIS700.
It works perfectly BUT only when it is connected to proAIS2 (usb cable to my PC + "connect" button in application proAIS2). As soon as I disconnect (with the disconnect button in the application) I loose the signal on my C70 MFD.
My system is:
AIS 700 <--> C70 MFD (NMEA0183)
RN300 tracer <--> C70 (seatalk)
RN300 tracer --> VHF navicom (NMEA0183)
the AIS700 is NEW.
Before installing it I was sending AIS signal from VHF to MFD C70 (NMEA0183) and it was working perfectly.
Thank you for you support,
Benjamin
RE: [LW11] AIS700 works only with ProAIS2 connected (USB) - Louise - Raymarine - Moderator - 06-03-20 05:07 AM
Dear bhollard,
Can you send over a wiring diagram and the software revision in the AIS700?
Many Thanks
Louise