+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: Software update does not finish (/showthread.php?tid=11418)
Software update does not finish - schomakr - 05-25-20 02:16 PM
Trying to update my axiom 9 to current version of lighthouse 3. Have Quantum doppler connected to mfd. when I power up it sees the the software update in the slot. I select both and select install. On the radar it says failed to start and then it says installing with a 10 mi 45 sec estimated time. It counts down to zero and after an additional 25 min it still says installing. What can I do to make it take the update?
RE: Software update does not finish - Chris - Raymarine - Moderator - 05-29-20 09:19 AM
Hi schomakr,
Try doing just the display update to see if that works. Software updates can have a number of reasons for not going though. If that does not work the next step would be to try the download onto a different card.
Chris,
RE: Software update does not finish - schomakr - 05-30-20 01:54 PM
Thanks. I was able to just update the mfd. after that I was able to update just the radar.