+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [TG] [TG11] how to correct depth on E series Plotter (/showthread.php?tid=11449)
[TG11] how to correct depth on E series Plotter - obx - 05-27-20 07:45 AM
My E series Hybrid depth is always wrong, normally showing 300-5000 ft depth when I'm only in 12-50ft of water. is there a way to correct this or re-calibrate?
RE: [TG11] how to correct depth on E series Plotter - Tom - Raymarine - Moderator - 06-01-20 11:23 PM
Hello obx,
Can you send us some images of your Fishfinder page, so that we can see what data it is that that incorrect reading is being gathered from?
There's lots of info on the background behind incorrect sounder operation or poor performance at https://forum.raymarine.com/showthread.php?tid=9371
Regards,
Tom