+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [TG] [TG11] Edson Rudder Arm - Linear drive mounting location (/showthread.php?tid=11453)
[TG11] Edson Rudder Arm - Linear drive mounting location - clburti - 05-27-20 09:45 AM
I am upgrading our EV-100 Raymarine Wheel Pilot installed in a Catalina 320 to an ACU-200 and Type 1 Linear Drive. Edson advised me to check with Raymarine on how far from center of rudder shaft to drill the rudder arm for the tiller pin.
RE: [TG11] Edson Rudder Arm - Linear drive mounting location - Tom - Raymarine - Moderator - 06-01-20 11:29 PM
Hello clburti,
You can find the Linear Drive's installation manual here, which will give this and other mounting dimensions.
Regards,
Tom
RE: [TG11] Edson Rudder Arm - Linear drive mounting location - clburti - 06-03-20 07:37 AM
Thanks, somehow I missed that information while reading the instructions...
RE: [TG11] Edson Rudder Arm - Linear drive mounting location - Tom - Raymarine - Moderator - 06-05-20 12:15 AM
No problem, I'm glad you found the answer you were after.
Regards,
Tom