+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [TG] [TG11] Connecting a Fusion RA70 with NMEA2000 port to an Axiom Pro? (/showthread.php?tid=11503)
[TG11] Connecting a Fusion RA70 with NMEA2000 port to an Axiom Pro? - Grady330 - 05-29-20 02:20 PM
From what I read in one of your FAQ threads above, it sounds like it's as easy as running an NMEA2000 cable from the Fusion RA70 and using a Seatalk to NMEA2000 adapter and simply plugging it into an open port on the existing 5-port Seatalk connector. Am I reading that correctly?
RE: [TG11] Connecting a Fusion RA70 with NMEA2000 port to an Axiom Pro? - Tom - Raymarine - Moderator - 06-09-20 09:30 PM
Hello Grady330,
That's right. Just make sure that the Fusion isn't outputting power to STNG/NMEA2000, since it's important to only have a single point of power and some Fusion stereos (I don't know if the RA70 is amongst them) can/do output what they refer to as NRX Power. Multiple points of power, particularly if one of them is a switchmode supply, can cause reliability issues.
Regards,
Tom