+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [TG] [TG11] E 120 Classic to Axiom7 (/showthread.php?tid=11509)
[TG11] E 120 Classic to Axiom7 - Thefin25 - 05-30-20 01:15 AM
Can I interface E120 MFD and its charts , platinum +, with Axiom 7? If so how is it done.
I Don't see a difference in the detail charts and the fishing charts on the Axiom. Is a different chart card needed?
RE: [TG11] E 120 Classic to Axiom7 - Tom - Raymarine - Moderator - 06-09-20 11:37 PM
Hello Thefin25,
No, I'm sorry to say that's not possible, the general rule is that only displays that are running the same software can be networked over SeatalkHS / Raynet / Ethernet to share radar, chart, sonar etc.. You will need a separate chart card for each.
Regards,
Tom