+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [TG] [TG11] How do I network a second Axiom9. (/showthread.php?tid=11515)
[TG11] How do I network a second Axiom9. - tjwatt - 05-31-20 02:48 PM
I am wanting to add a second Axiom9 to the back of my boat. I need help trying to figure out what cables I need to purchase and what hooks up to what. I will be hoping to use both unit to display identical charts and fishfinder info. Thank you.
RE: [TG11] How do I network a second Axiom9. - Tom - Raymarine - Moderator - 06-10-20 12:23 AM
Hello tjwatt,
Assuming the Raynet network port in your existing display is available (not already connected to a radar or sounder module) then you simply need a Raynet cable of the right length to connect them together. If your Raynet network port is in use already then you need to connect both displays and the other device to an HS5 network switch. You'll probably need a couple of Raynet cables to make that happen.
Make sure you update both displays to the same (latest) software version too.
Regards,
Tom