+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: Connecting analog transducer to Axiom 9 (/showthread.php?tid=11583)
Connecting analog transducer to Axiom 9 - phoenixsf29 - 06-05-20 10:20 AM
Is it possible to connect a three wire analog depth transducer to an Axiom 9 via seatalk without a depth instrument?
RE: Connecting analog transducer to Axiom 9 - Chris - Raymarine - Moderator - 06-23-20 03:34 PM
Hello phoenixsf29,
This is not possible. You can connect that transducer to a itc-5 and then to the Axiom.
Chris,
RE: Connecting analog transducer to Axiom 9 - jt2 - 06-25-20 10:14 AM
You can connect the analog 200khz transducer to a iTC-5 with an Axiom ? I thought it had to be with an i70. Will the Axiom calibrate iTC-5 without an i70 in the system as well? Thanks!
RE: Connecting analog transducer to Axiom 9 - Chris - Raymarine - Moderator - 06-26-20 08:45 AM
The ability to calibrate the itc-5 has been added in the software for the Axiom. As long as you have one Axiom or one i70 you have the ability to operate and calibrate the itc-5 with its transducer(wind,speed,depth).
RE: Connecting analog transducer to Axiom 9 - Tamrow - 06-28-20 10:10 AM
Can you please explain how to calibrate the itc-5 with the Axiom as well as the i70.
RE: Connecting analog transducer to Axiom 9 - Chris - Raymarine - Moderator - 07-02-20 09:27 AM
Hello Tamrow,
Please see this link for the Axiom operation manual which includes the calibration instruciutons, https://www.raymarine.com/service-and-support/manuals-and-documents/
I have also attached the guide for the i70 which also contains the calibration instructions,
Regards,