Raymarine forum
AIS 350 connection to two C80 Chart Plotters - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: AIS (/forumdisplay.php?fid=22)
+--- Thread: AIS 350 connection to two C80 Chart Plotters (/showthread.php?tid=11613)



AIS 350 connection to two C80 Chart Plotters - FootLoose_Norm - 06-07-20 05:47 PM

Would I be able to connect a Raymarine AIS350 to two Raymarine C80 Chartplotters using NEMA0183-34800 connections. One C80 is on the upper helm while the other C80 is located on the lower helm. This would be for a simultaneous display of AIS targets on both C80 chartplotters. I am currently using NEMA0183-4800 from my upper helm C80 for connection to a Standard Horizon GX2100 VHF marine radio for GPS information on the radio.


RE: AIS 350 connection to two C80 Chart Plotters - Chris - Raymarine - Moderator - 06-26-20 03:37 PM

Hello FootLoose_Norm,

This would not work. My recommendation would be to connect the AIS to the display where it would be viewed the most,

Regards,

Chris,