+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: RL80C Not Starting (/showthread.php?tid=1162)
RL80C Not Starting - tholley55 - 06-15-16 01:18 PM
Hello,
I'm having a problem with it not starting. Sometimes just a flicker on pressing the button, but mostly nothing at all. I tried re-attaching the plugs, and got one normal startup then nothing after that. There is no visible corrosion on the plugs. Any advice on solving this would be much appreciated.
thank you,
Tim
RE: RL80C Not Starting - Chuck - Raymarine - Moderator - 06-15-16 02:08 PM
Welcome to the Raymarine Technical Forum Tim,
It is recommended that the power cable be unplugged from the display's power socket and that the loaded system voltage then be measured at the plug to ensure that the measured loaded system voltage is within the operating range of the hsb/hsb2/SL Pathfinder Series Radar Display (10.7-32.0 VDC). If so, then the display would be deemed to have suffered an internal failure necessitating that it be replaced, as Raymarine's Product Repair Center can no longer service hsb/hsb2/SL Pathfinder Series Radar, Chartplotter, and Fishfinder Displays.
Please click here to view a FAQ addressing how a hsb/hsb2/SL Pathfinder Series Display would be replaced with a currently manufactured MFD.