+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: Dragonfly 4-pro display issues (/showthread.php?tid=1219)
Dragonfly 4-pro display issues - costellokm - 06-21-16 06:02 PM
When I was last on the water, my unit started having display issues. I recently updated the software and am still experiencing the issue.
Has anyone had this similar issue?
How did you correct it?
Thanks,
Kevin
RE: Dragonfly 4-pro display issues - Chuck - Raymarine - Moderator - 06-22-16 02:03 PM
Welcome to the Raymarine Forum Kevin,
Should you have:
- updated the display with v12.09 Dragonfly software, and
- verified that the transom mounted Dragonfly transducer has not kicked up, and
- verified that the vessel be located within the water and should the depth of the water be at least 3' below the transducer, but not more than 600', and
- the sounder produces the plot shown within your photo,
then it is recommended that the Dragonfly display be sent to Raymarine’s Product Repair Center to be bench tested/serviced.