+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: Route append (/showthread.php?tid=1254)
Route append - Sdaury - 06-26-16 04:39 PM
Hi have an ES MFD and a C120. On the ES7 how do you add way points to an existing route either before the first or after the last waypoint?
RE: Route append - Chuck - Raymarine - Moderator - 06-27-16 03:28 PM
Welcome to the Raymarine Forum Sdaury,
It is not possible to prepend, insert, or append waypoints to an existing route within a graphical manner. However, it is possible to add waypoints to a route and manipulate their position within the route's sequence via the MFD's Route Editor feature. This feature may be access via the command sequence HOME->MY DATA->ROUTES->Select Route From Route List or the following command sequence from the Chart application: MENU->MY DATA->ROUTES->Select Route From Route List.
RE: Route append - E.hatch2086@cox.net - 06-27-16 04:49 PM
So if I understand you within the editor I could append a route by inserting existing waypoints using the waypoint list only.
RE: Route append - Chuck - Raymarine - Moderator - 06-28-16 08:08 AM
E.hatch2086,
Essentially, the route editor permits one to add waypoints from the MFD's waypoint list to the end of the route. The Route Editor has a second feature to permit waypoints to be shifted up/down within the route's waypoint sequence.