+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: Component Compatibility (/showthread.php?tid=1405)
Component Compatibility - bradleyj - 07-19-16 10:20 AM
I'm considering slowly starting to upgrade my all-analog C120 Classic-based system to digital. Can anyone tell me if my B256 bronze temp/depth transducer and ST600 paddlewheel speed/temp transducer that I currently have hooked up to a DSM250 sounder module via a y-cable will work with a DSM300? Would the DSM300 accept the same Y-cable connector?
RE: Component Compatibility - Chuck - Raymarine - Moderator - 07-19-16 10:48 AM
Welcome to the Raymarine Forum bradleyj,
All transducers, including speed/temp transducers, which were designed for use with a DSM250 may be used with a DSM300 or DSM30. The transducer cable (or in this case y-cable) would simply be unplugged from the DSM250 and then plugged into the DSM300 or DSM30's Transducer socket.