+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: Ev100 setup (/showthread.php?tid=1453)
Ev100 setup - cddcdccm - 07-24-16 08:43 PM
Should a on/off switch be on the ACU100 power supply with a 10A in line fuse? Sea Talk backbone power supply requires a 5A in line fuse?
RE: Ev100 setup - Chuck - Raymarine - Moderator - 07-28-16 02:27 PM
Welcome to the Raymarine Forum cddcdccm,
It is indeed recommended that the ACU-100 be powered from a switched 12VDC power circuit which is protected with a 10A fuse. Should the supplying circuit pass through a breaker panel or switched fuse panel, then these items will effectively function to switch power ON/OFF to the ACU-100.
RE: Ev100 setup - cddcdccm - 08-01-16 02:18 AM
Thanks for the reply. I set it up with a switch and inline fuse today. Do I need to run a wire for the RF ground to the negative bus bar? I don't have a ground on my boat.
RE: Ev100 setup - Mark - Raymarine - Moderator - 08-02-16 04:02 PM
Yes, On vessels without an RF ground system the drain conductor (screen)
should be connected directly to the negative battery terminal.
RE: Ev100 setup - cddcdccm - 08-02-16 11:22 PM
Thanks for the help.
RE: Ev100 setup - Mark - Raymarine - Moderator - 08-03-16 04:09 PM
Your'e welcome.