+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: C-Series Classic MFD's backlight flashing (/showthread.php?tid=147)
C-Series Classic MFD's backlight flashing - Chuck - Raymarine - Moderator - 01-25-16 09:48 AM
C-Series Classic MFD's backlight flashing
It is recommended that the C-Series Classic MFD's (C70, C80, C120) power cable be unplugged and that the loaded system voltage be measured at its plug to ensure that it is within the operating range of the MFD (10.7-32.0 VDC). If so, then the MFD would be deemed to have suffered an internal failure necessitating that it be serviced by Raymarine's Product Repair Center.
RAYFAQ#