Raymarine forum
replacing the radome enclosure - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Radar (/forumdisplay.php?fid=125)
+--- Thread: replacing the radome enclosure (/showthread.php?tid=1491)



replacing the radome enclosure - rlschmidt - 07-28-16 05:15 PM

My 18" digital radar scanner had an unfortunate encounter with a bridge. the plastic case was broken, but the internal parts were not damaged. The unit still works correctly. I repaired the case, but would like to replace it. How do I order a new case for the unit. I have had no success trying to find out via phone.

Thanks
Capt. Bob Schmidt


RE: replacing the radome enclosure - Chuck - Raymarine - Moderator - 07-29-16 01:29 PM

Welcome to the Raymarine Forum Bob,

What model of radome is installed onboard your boat?


RE: replacing the radome enclosure - rlschmidt - 07-31-16 08:41 AM

It is a Digital Radome Scanner. The model is E92129, serial number is 0210241.


RE: replacing the radome enclosure - Mark - Raymarine - Moderator - 08-01-16 01:29 PM

Hello Bob,
You would need to contact Raymarine Order Services at 1-800-539-5539
and supply them with Raymarine Part# R92145 Digital Radome 18" Base & Top.


RE: replacing the radome enclosure - rlschmidt - 08-01-16 05:26 PM

OK thanks. I will do that.


RE: replacing the radome enclosure - Chuck - Raymarine - Moderator - 08-02-16 11:50 AM

You're welcome.