+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Marine Cameras (/forumdisplay.php?fid=121)
+--- Thread: connecting analog cams to an e78 (/showthread.php?tid=1496)
connecting analog cams to an e78 - dmahler - 07-29-16 07:45 AM
HI,
I would like some help in connecting an set of analog cams to my new e78 display. I have the e78, set up and running, and now just got the cable to connect to my cam. Once I connect, how do I:
1- set up the camera to show on the display
2- make the "home screen" show the camera and perhaps a chart at the same time?
(split screen or child screen??)
Thanks,
David J. Mahler
RE: connecting analog cams to an e78 - Chuck - Raymarine - Moderator - 07-29-16 12:46 PM
Welcome to the Raymarine Forum David,
Q1. set up the camera to show on the display
A1. the detailed procedure for configuring the Camera application to display video from an analog video source which has been interfaced to the MFD's NMEA 0183 / Video Input Cable may be found within section 18.2 - Changing the camera / video feed of the LightHouse II MFD Release 17 Operation Instructions.
Q2. make the "home screen" show the camera and perhaps a chart at the same time?
A2. The detailed procedure for customizing pages of the Homescreen may be found within section 3.8 - Pages, subsection: Changing an existing page on the
homescreen, of the LightHouse II MFD Release 17 Operation Instructions.