+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Marine Cameras (/forumdisplay.php?fid=121)
+--- Thread: Cam220 ip (/showthread.php?tid=1529)
Cam220 ip - Seahorse - 08-02-16 07:28 PM
Chuck can you tell me the cables that I will need to have on hand to install a Cam220 ip and connect it to my eS98? I want to run a cable from my arch to the eS unit.
RE: Cam220 ip - Mark - Raymarine - Moderator - 08-03-16 02:47 PM
Hello Seahorse,
In order to install the Cam220 IP directly to your eS98 you simply need a RayNet to RJ45 male adaptor cable of whatever length. You should get a waterproof coupler with the Cam220 IP camera.
A62360 - 1 Meter
A80151 - 3 Meter
A80159 - 10 Meter
RE: Cam220 ip - Seahorse - 08-04-16 02:28 PM
Thank you very much
RE: Cam220 ip - Mark - Raymarine - Moderator - 08-04-16 03:53 PM
Your'e welcome.