+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: Install EV-200 Power Hydraulic Evolution Auto Pilot (/showthread.php?tid=1593)
Install EV-200 Power Hydraulic Evolution Auto Pilot - scottor - 08-10-16 07:34 AM
I have purchased a used 2011 - 30 ft power boat and want to install a Raymarine EV-200 autopilot system connecting to an existing system, E140W MFD, Raystar 125 GPS, 18" digital radome and a CP370.
Is the EV-200 compatible with my 2010 version E140W?
Do you have a start up procedure for this install? it appears to be a plug & play add on.
Would you also recommend that I update any down loads for the E140W?
Thank you, Scott
RE: Install EV-200 Power Hydraulic Evolution Auto Pilot - Chuck - Raymarine - Moderator - 08-19-16 03:59 PM
Welcome to the Raymarine Forum scottor,
The Evolution autopilots are indeed compatible with the E-Series Widescreen MFDs. As both of these products feature SeaTalkng communications interfaces, they are designed to be interfaced to via a powered and properly terminated SeaTalkng backbone. The Evolution Autopilots are extremely easy to commission ... just run the Dockside Wizard and then take the boat out for a deviation/handling sensing cruise. Details of the procedure may be found within the Evolution autopilot Set-up and Commissioning with p70 and p70R guide.