Raymarine forum
a78 - display route driven on chart - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: a78 - display route driven on chart (/showthread.php?tid=1596)



a78 - display route driven on chart - scoffer - 08-10-16 01:16 PM

Is there a way to make the a78 display the route that you have driven? For example, I want to be able to see where I have trolled for salmon so that I can go back and forth and cover new ground or turn around and go back to a spot when a fish hits.

I have seen this on Lowrance units before, but I haven't found the feature in my a78 yet. I'm guessing it is there, I just haven't found it yet.


RE: a78 - display route driven on chart - Chuck - Raymarine - Moderator - 08-19-16 03:24 PM

Welcome to the Raymarine Forum Scoffer,

I believe that the feature which you are referring to is known as tracks. The Chart application page/pane's Tracks feature is configured ON/OFF via the command sequence MENU->MY DATA->TRACKS->START TRACK/STOP TRACK from within the Chart application page/pane being viewed. Saved tracks may be similarly viewed or hidden.


RE: a78 - display route driven on chart - scoffer - 08-23-16 11:08 AM

Thanks Chuck, that was exactly what I was looking for.


RE: a78 - display route driven on chart - Chuck - Raymarine - Moderator - 08-23-16 12:06 PM

You're welcome.