+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: Arrival alarm (/showthread.php?tid=1677)
Arrival alarm - rlschmidt - 08-18-16 01:54 PM
Is there a way to either disable the arrival alarm or lower the frequency of it? My high frequency hearing is shot, and I don't even hear it. One of the crew usually has to tell me to turn it off.
RE: Arrival alarm - Chuck - Raymarine - Moderator - 08-19-16 08:41 AM
Welcome to the Raymarine Forum rlschmidt,
Unlike the software of the a/c/e/eS/gS-Series MFDs, the software of the MFDs which preceded the a/c/e/eS/gS-Series MFDs did not permit the Arrival Alarm to be disabled. Raymarine MFDs do not feature a configuration setting whereby there owners may configure the frequency and/or volume of alarms sounded by the MFD.
RE: Arrival alarm - rlschmidt - 08-20-16 08:30 PM
This is a C90W MFD. Does it fall in that catagory? I upgraded the software earlier this year. I can go out to the boat to check the version number.
RE: Arrival alarm - Chuck - Raymarine - Moderator - 08-22-16 11:08 AM
rlschmidt,
The C-Series Widescreen MFDs (C90W, C120W, C140W) are not a/c/e/eS-Series MFDs and as such, the Arrival Alarm within these MFDs cannot be configured OFF.