+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Communications (/forumdisplay.php?fid=24)
+--- Thread: Ray215 Squelch (/showthread.php?tid=1724)
Ray215 Squelch - jstenzel - 08-24-16 04:48 PM
My squelch cannot be turned low enough. At the minimum the display shows two bars and nothing comes through. It cannot be turned down to a point where the radio makes static like it did when it was new. Transmission works fine. Is there a way to adjust the squelch level lower or do I need to send it to repair or is it hopeless?
RE: Ray215 Squelch - Chuck - Raymarine - Moderator - 08-25-16 08:14 AM
Welcome to the Raymarine Forum jstenzel,
Based upon the symptoms reported, the radio's receiver circuitry would seem to have suffered a failure and it would be recommended that the Ray215 be replaced (typically w/Ray50 or Ray60) or sent to Raymarine’s Product Repair Center to be bench checked / serviced.