Raymarine forum
ST60 Tridata no SeaTalk output? (Very Technical) - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: ST60 Tridata no SeaTalk output? (Very Technical) (/showthread.php?tid=177)

ST60 Tridata no SeaTalk output? (Very Technical) - nigelmercier - 02-17-16 05:21 PM

I have an ST60 Tridata with a faulty Seatalk output. The output is generally at 0V, but with both positive and negative glitches which bizarrely coincide with the frequency of the input signal from the Paddle Wheel on the green pin (simulated in my case).

I've traced the Seatalk signal internally, and it appears to look like this on the TX output of the microcontroller. I'm inclined to think that the fault lies with a discrete component, perhaps a clock generator for Seatalk. 

Although I have a schematic diagram for this device, I don't have any details of the various signals around the uC. Can anyone help?

RE: ST60 Tridata no SeaTalk output? (Very Technical) - Steve - Raymarine - Moderator - 02-18-16 02:58 PM

Component level diagnostics and design information is beyond the scope of this forum. I will leave this discussion open for other forum members who choose to assist. It is my recommendation to send the product to the below address to be evaluated by a service technician for repair.

Raymarine Service Center
9 Townsend West
Nashua, NH 03063

Include in the box:
Daytime Phone
Return address
Brief description of the issue