+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: RS130 (/showthread.php?tid=1779)
RS130 - Tony T - 09-04-16 11:11 AM
Is there a schematic for the proper wiring of an RS 130 to my pathfinder series electronics .. RL80c -DSM250 - Auto pilot - L760- .. all are HSB2 plus units . What additional components do i need to install ? >>>>>> IN THE INTERIM > I found a schematic on the old forum ... I think I will be good .. my system does not use a R55006 so I need to figure out where they powered the older rs125 from .. I believe everything is spliced together .. so if you have any advice as to where I should start checking it would be appreciated..
Thanks
Tony
RE: RS130 - Mark - Raymarine - Moderator - 09-06-16 03:08 PM
Hello Tony T,
Please click here to view a FAQ addressing this subject.